First, processing network cleaning:

1、切斷電源，打開檢修門。

1, cut off the power supply, open the door.

2、將預處理網拉出。

2. Pull out the pretreatment net.

3、放入清洗槽中浸泡十分鍾，輕輕將網上油汙清洗幹淨，並用清水徹底衝洗幹淨。

3, put into the sink for ten minutes, gently clean the oil on the net, and rinse thoroughly with clean water.

4、將幹燥的預處理網按原位置放回靜電式油煙淨化器。

4. The drying pretreatment net is put back to the electrostatic fume purifier according to the original position.

二、電場清理:

Two. Electric field cleaning:

1、切斷電源，打開檢修門，取出電場。

1, cut off the power supply, open the door and take out the electric field.

2、用清潔片（塑料片）放在電極板中間，貼著電極板由上向下移動，隻需將電極板上大部分油汙清理掉即可，一次清理不幹淨，可以多次清理。

2. Clean the pieces (plastic pieces) in the middle of the electrode board, stick to the electrode board, move up and down, just clean most of the oil on the electrode board. Once cleaning is not clean, it can be cleaned several times.

3、清理幹淨刮下的油汙，用清水洗幹淨。

3, clean up the scraping oil, wash with clean water.

4、清洗過的電場自然風幹（如仍有少量油汙，不會影響產品淨化效果）。

4, the electric field cleaned naturally dry (if there is still a small amount of oil pollution, will not affect the product purification effect).

5、將幹燥的電場按原位置放回淨化器，關上檢修門便可以重新工作。

5. Put the dry electric field back to the purifier in the original position and turn off the door before you can work again.

客戶的滿意就是對麻豆精品国产传媒的肯定，歡迎您前來選購我公司的產品，麻豆精品国产传媒一直以為您提供產品為己任並一直堅持這樣做。歡迎您的光臨。

Customer satisfaction is our affirmation, you are welcome to come to buy our products, we have always thought you provide products as their own responsibility, and has always insisted on doing so. Welcome to our company.