(1) 油煙吸收率應大於95%,采用同誑導流圍護裝置。
(1) fume absorption rate should be greater than 95%, using the same use of diversion protection device.
(2) 圍護結構應配有鉸接式檢查門,以便於衛生清潔及觀察。
(2) the enclosure should be equipped with an articulated check door to facilitate sanitary cleaning and observation.
(3)設備全部由不鏽鋼製成,所有聯結處為防水、防蒸汽、防油煙。
(3) all the equipment is made of stainless steel. All connection places are waterproof, steam proof and fume proof.
(4)風罩嵌入吊頂內,兩者之間設有不鏽鋼裝飾板,用厚度1.2㎜的不鏽鋼板製造,易拆卸,嵌入深度≥100㎜。

(4) hood embedded in the ceiling, stainless steel decorative plate is arranged between the two, manufacture, easy disassembly of stainless steel plate thickness of 1.2 mm, 100 mm above the embedded depth.
(5)全部罩體用厚度大於1.0㎜的不鏽鋼板製造.
(5) covering the whole body with a stainless steel plate thickness greater than 1 mm.
(6)通風管用1.0鍍鋅板製成，設有不鏽鋼鐵風量調節閥。
(6) the ventilation pipe is made of 1 galvanized plates and has a stainless steel iron volume regulating valve.
(7)照明設備是防濺,防水、內凹型的,分布於每1000㎜距離，並應將所有電線套於導管中，用接駁箱連接。照度裝置大於等於600lux,采用芝光管燈,統一的電力接口。
(7) the lighting equipment is splash proof, waterproof, concave type, distribution in each 1000 mm distance, and should be set to all wire conduit, connected with the connection box. The illumination device is greater than or equal to 600lux, the use of energy-saving Chicago neon lights, power unified interface.
(8) 風罩豎板帶有一體環繞的自排裝置,排放槽易於清洗油煙、蒸汽,排放管為不鏽鋼製,並聯風罩的全自動自清潔裝置
(8) since the exhaust hood riser with one surround the discharge groove and easy cleaning fume, steam discharge pipe, stainless steel, parallel to the wind hood automatic self cleaning device

上一篇：鍍鋅板風管和普通通風麻豆视频官网的使用區別
下一篇：麻豆国产视频麻豆视频官网的串煙現象的處理？